Expert Answers about Jayco Melbourne Motorhome
- Recommended Seat Covers for 2012 Jayco Melbourne on Ford E-450 Chassis
- I have a solution for you, but the Classic Accessories # CA80112 will not fit a chair of that size and aren't going to be the best solution for your 2012 Jayco Melbourne built on a Ford E450 chassis. Instead I recommend using the Covercraft Work Truck SeatSaver Custom Seat Covers # SS2422PCTP, which we've previously determine will fit on the E-450 chassis that Jayco builds their Class C coaches on so they'll work well on your seat that is 27" at the back.
I've linked a review video of...
view full answer... - Replacement Frame for Kwikee 26 Steps
- I checked with Lippert and the Kwikee 26 Series step does not have an available frame replacement for it, so you will need to replace the entire step assembly. For a new Kwikee 26 Series Step you'll want to use the # LC3711361, which fits on coaches with a 20-1/2" x 7-1/2" bolt pattern and is an electric step with 1 riser that does not contact the ground.
I've linked a review video of this part for you to have a look at, as well.
view full answer... - Replacement Cover for Ventline model v2525
- For your Ventline model v2525 you can use the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BBC0530-01 (for white) or # BV0554-03 (for smoke).
view full answer... - Should the Blue Ox KarGuard be Used on a 2018 Chevrolet Equinox?
- I have not heard of such an issue to be completely honest and I can't see why airflow would be affected. The Blue Ox KarGard Towed Vehicle Protector # BX8870 is a universal part that will work with most Blue Ox tow bars so really that is the only specific thing you'd need to abide by.
The 12" I'm assuming you're referring to has to do more so with the motorhome side and it hitting your ladder or bumper, since it's closest to the toad you'll be fine.
view full answer... - 24x64 RV Bumper Cargo Carrier Compatibility With A 2021/2022 Jayco Melbourne 24L
- You should have no issues installing the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR on your 2021/2022 Jayco Melbourne 24L motorhome as long as your bumper is no larger than 4-1/2" x 4".
We wouldn't be able to tell you a definitive yes or no as we do not know the size of your bumper, however you can easily verify by taking a quick measurement of the height and width.
view full answer... - Can the Progressive Dynamics Pure Sine Wave Inverter PD64FR Be Wired Without the Transfer Switch
- No, the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch # PD64FR cannot be wired to run without the internal transfer switch.
If you are needing a pure sine wave inverter without a transfer switch, you can use a Go Power inverter like the Go Power Industrial Pure Sine Wave Inverter # 34278157.
view full answer... - Can Wheel Masters 2-Hose Kit for Duallys Be Used with Rubber Valve Stems and TPMS Caps?
- I reached out to my contact at Wheel Masters about your questions. The Wheel Masters # WM8009 can be used with rubber valve stems and will be compatible with TPMS systems.
view full answer... - Troubleshooting Furrion S Side Cameras with Clearance Lamp Function
- When you say powered side lights of the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 from clearance circuit, did you attach the trigger wire to that power circuit also or to the turn signal circuit? If you attached the trigger wire to the clearance power circuit as well, then your camera should be on at all times. If your trigger wire is attached to the turn signal circuit even though power comes from the clearance circuit then your...
view full answer... - Spare Tire Carrier for Motorhome
- For a spare tire carrier on your motorhome you will need the Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225.
This will mount in your hitch and it has the ability to carry wheels that are between 16" and 24-1/2", as well as any bolt hole mounting pattern. It is strong enough for a large tire like what are on motorhomes so this is the carrier I recommend. I have added a link to a video review for you to check out as well.
view full answer... - Replacement Vent Cover for Ventline VBO568 Dome Lid with Side Slider
- I may have a solution for you, but we don't have any roof vent covers that have the side slide that you're looking for and I can't say that I've seen anyone successfully modify these since the arms are riveted into the plastic.
With that said, you could use the Camco Aero-Flo RV Roof Vent Cover w/ Swing Open Lid - White # CAM40421, which basically acts like 2nd cover and would allow your roof vent to remain open while still preventing rain from getting in. This solution would allow you...
view full answer... - Can Trailer Scissor Jacks Be Installed on Front of Jayco Travel Trailer
- In regards to trailer scissor jacks like Leveling Scissor Jack # JSC-24-IND, these simply need to be bolted to the frame either at the front or the rear. I don't have installation advice on these for any one specific trailer but so long as you don't have anything else on the frame that would be in the way of these jack there should be no issues with mounting.
I have attached a review video for you which goes over the installation in more detail.
view full answer... - Do Dually Tire Chains Need to be Used for Class C RV with Dual Rear Wheels
- Since your 2020 Jayco Melbourne Motorhome is a dually you'll want tire chains that are designed for that type of tire setup. I recommend checking out the Titan Chain Alloy Tire Chains w/ Cams for Dual Tires # TC4219SCAM because this set uses square links that will provide better traction than the twist link and v-bar alternatives.
Attached is a review video for you to check out.
view full answer... - Recommended Trailer Brake Controller For a 2023 Jayco Melbourne On Mercedes Sprinter 3500 Chassis
- I recommend the Redarc Tow-Pro Elite Brake Controller # RED63RR for your 2023 Jayco Melbourne. This uses a small control knob mounted to your dash so you do not have to deal with a large box like other controllers use mounted to the dash. The Adapter # 3063-P will plug into the factory connector on your Mercedes Benz 3500 Sprinter chassis.
view full answer... - Solution to Add Vent for Motorhome with Broken Northern Breeze Vent Screen
- The correct replacement screen for your Northern Breeze vent is part BVDO231-00 but this was discontinued awhile back so I recommend replacing your whole vent to a newer model. The nice thing about roof vents is they all fit the same standard 14"x14" opening so finding a replacement is really easy.
If you want motorless vent I recommend the Ventline E-Z Lift which comes with either a White Cover # V3092-601-00 or a Smoke Cover # V3092-603-00.
For something a bit nicer I recommend checking...
view full answer... - How Far from the Wall Does the Male Side of the Mighty Cord 90 Degree Plug Stick Out When Plugged in
- The Mighty Cord 90-Degree Detachable RV Power Cord w/ Locking Ring and LED part # A10-3025ED90 has a male plug that will stick out from the face of the outlet by 2 1/8".
view full answer... - SumoSprings and Rear Sway Bar for 2020 Jayco Melbourne
- For the rear axle of your 2020 Jayco Melbourne you'd want the SumoSprings kit part # SSR-338-47 and then for the front you'd want the part # SSF-106-40.
While we don't carry the Helwig brand we do have the Roadmaster rear sway bar kit that fits your motorhome with part # RM-1209-131 which will work extremely well to improve the handling and ride quality of your motorhome.
view full answer... - Replacement Lens for Omega RV Dome Light with Switch
- The replacement lens for the Omega Single RV Dome Light with Switch # 328-001-901XPW (and Double Version # 328-001-902XPW) is part # 328-89-255 on our site. It does have the same dimensions as what you mentioned but I'm not sure if it will be an exact fit since it seems like you have a different brand.
You may consider swapping out your entire assembly with one mentioned above to help avoid your bulb burning through the lens again in the future.
view full answer... - How To Carry Two E-Bikes and Kayaks On a Motorhome
- I have some great options for carrying two kayaks and two bikes behind a motorhome, the trailer will be best used for the kayaks due to the crossbar spread. I recommend the Malone EcoLight Sport Trailer for 2 Kayaks part # MAL93FR for this. Then, in order to carry the two bikes you can use the Gen-Y Adjustable 2-Ball Mount part # 325-GH-414 along with a bike rack of your choice. The Hollywood Racks RV Rider Bike Rack part # HLY64FR is e-bike rated and can be used on a motorhome.
view full answer... - What Is The Global Link Locking Baggage Lock GL34FR Made Of
- Hey Eric sorry for the delayed response. As far as the Global Link Locking Baggage Lock Actuator Set with Mounting Plate # GL34FR, the handle and face plate are made of plastic. The mounting plate is made of steel. This latch will work on doors 0.7" to 1.25" thick.
view full answer... - Recommended SumoSprings For A 2020 Jayco Melbourne 24L
- The correct weight capacity SumoSprings system for your 2020 Jayco Melbourne will depend on how much support you are looking for. If you are not getting a lot of body roll and just need a little support, go for the 900 pound # SSR-338-47.
On the other hand, if you are getting a lot of body roll and or sag and need a good amount of support, the # SSR-338-54 will be the better option. With that said, the 2020 Jayco Melbourne 24L weighs just over 11,000 pounds, so the lower capacity # SSR-338-47...
view full answer...
Go To Results